21

2026

-

11

Analysis of brake failure reasons and how to save yourself in critical moments


Recent traffic accidents have once again put large trucks in the spotlight. A truck driving at night lost its brakes and hurtled towards roadside shops and pedestrians, nearly causing injuries. In Wenshan, a truck's brake failure led to a nine-vehicle collision, fortunately without any casualties.▎Truck brakes fail on a downhill, driver experiences a life-or-death speed situation

刹车失灵原因分析 关键时刻该如何自救

This was an accident that happened this summer. At the time, a large truck loaded with rubble lost control because the brakes failed on a long downhill stretch. During the descent, inertia caused the front of the truck to tilt forward, making the scene very tense. In a split-second decision, the truck driver jumped out of the vehicle, turning it into a truck version of a high-speed life-or-death escape

.▎Truck brakes fail and crash into a supermarket, shopper narrowly escapes death

刹车失灵原因分析 关键时刻该如何自救

The incident happened in Lishui City. An aunt who was shopping at a fruit stall suddenly made a move and ran away because a large truck hit the wall panel and directly crashed into the supermarket. The reason was that the truck's brakes failed and it lost control. From the video, you can see the vehicle rushing straight into the area where the fruits were displayed. Luckily, the lady shopping ran fast, otherwise it could have been a fatal accident. Among all traffic accidents, brake failure in large trucks is one of the most likely causes of accidents, and once an accident happens, it usually results in either death or serious injury, showing how crucial brakes are for trucks. Many truck drivers know the importance of brakes, but repeated incidents of truck brake failure, sometimes even causing the death of drivers, still serve as a warning. ● How brakes work As the saying goes, you need to understand the reason behind how things work. Many drivers don't know the braking mechanism of large trucks. Most trucks still use drum brakes, and regardless of the type, the principle is the same: when you press the brake pedal, it activates a lever which pushes the brake pump, and the brake disc and pads create friction to generate braking force, stopping the truck from moving forward.

 ▎Common causes of brake failure

刹车失灵原因分析 关键时刻该如何自救

Since fellow drivers already understand the basic working principle of brakes, you can now understand in daily life why certain actions can cause brake failure, which can be critical when it matters.

1. Constantly pressing the brakes

刹车失灵原因分析 关键时刻该如何自救

As you guys above already know, most trucks still use drum brakes. Drum brakes are cheap but have a major drawback: poor heat dissipation. On a small car, you might not notice the difference. But on a big truck, the poor heat dissipation becomes obvious because trucks need longer braking distances and stronger braking force. Frequent braking can cause the brake pads to overheat and fail, which is a common brake failure issue. 

2. Trucks speeding and overloading

刹车失灵原因分析 关键时刻该如何自救

If brake pads suddenly fail, there might be some uncontrollable reasons, but brake failure caused by trucks being overloaded or speeding is 100% due to human error, which is why truck drivers are constantly reminded not to overspeed or overload. Overusing the vehicle shortens its lifespan, and worn-out parts naturally increase the risk of problems.

刹车失灵原因分析 关键时刻该如何自救

3. Inadequate regular maintenance

Few truck drivers thoroughly check their brakes before every trip. They often skip regular maintenance, let alone daily checks, which they find tedious. Little do they realise that this kind of carelessness can lead to losing control of the vehicle at critical moments and cause serious consequences.

To do a good job, one must first sharpen their tools, a principle all truck drivers understand. Brakes and seatbelts can really save lives in crucial moments, so spending a few minutes on checks and keeping up with regular maintenance can prevent a lot of trouble.
 

刹车失灵原因分析 关键时刻该如何自救

4. Bad driving habits

Many truck drivers believe they can manage the first three points: not overloading, not speeding, and following traffic rules strictly, so they don't frequently honk. They also say they pay attention during routine maintenance.

But the last point is about bad driving habits. The difference between an experienced driver and a newbie lies here. Many people will come up with a bunch of excuses, but the simplest way is that cautious experienced drivers never lift their foot off the brake pedal.
 

刹车失灵原因分析 关键时刻该如何自救

Always keeping control of the vehicle is a good driving habit for experienced drivers, while young or less experienced drivers often have a kind of reckless courage and can speed up to 100 miles per hour, never stopping at 99. Forgetting about keeping a safe distance once on the road and letting themselves go is common, and in an emergency, they might slam the accelerator to the floor, and if the brakes suddenly fail, the consequences are unimaginable. Good driving habits are the foundation for ensuring safety.

▎How to save yourself if a lorry's brakes fail

Lorry drivers need to understand that even if all precautions are taken, accidents cannot be completely avoided. Although brake failure is rare, the “just in case” scenario is worrying. So, if you do actually encounter a lorry with failed brakes, how should you save yourself?
 

刹车失灵原因分析 关键时刻该如何自救

1. Stay Calm

Many truck drivers feel like death is looming when they discover their brakes have failed, especially in busy city areas or on the highway. At this moment, staying calm is the most important thing. Otherwise, your mind may go blank, and combined with the emergency, you could misjudge the road conditions and fail to avoid danger. You need to calm down first, rather than immediately jerking the steering wheel or honking the horn frantically.

刹车失灵原因分析 关键时刻该如何自救

2. Gently pull the handbrake and downshift to slow down

Earlier, it was mentioned not to honk the horn wildly. Actually, it's not about never honking, but about not pressing it frantically at first. First, gently pull the handbrake and downshift to slow down. The engine also has some counterforce, which can effectively reduce the speed at critical moments. As long as you slow down, truck drivers will have better control of the vehicle.
 

刹车失灵原因分析 关键时刻该如何自救

3. Look for an emergency lane or a safe area  

While downshifting and slowing down, the truck driver also needs to do one more thing: carefully observe the surrounding road conditions to find an emergency lane or a safe place. On the motorway, the vehicle can first be moved to the emergency lane to avoid a collision. If there is an open space nearby, or something like a drawing that can serve as a safe limit, that can be used for safety.
 

刹车失灵原因分析 关键时刻该如何自救

4. Looking for obstacles

Of course, it’s not always possible to successfully spot the time to avoid danger in every road situation, and at that point the truck driver can only use the last resort method: driving the vehicle along walls or barriers to slow down by friction. But you have to be sure, this is the last resort, and it's best to avoid it if possible, because this method carries certain potential risks for the truck driver.

Brake failure in a truck seems like a rare event, but improper handling can easily cause injuries to the driver. To fundamentally prevent such accidents, the key is to develop good driving habits and regularly check the vehicle. Preventing accidents is far more important than dealing with them after they occur.