03

2025

-

06

The most complete maintenance manual for semi-trailers, card friends hurry up to collect


During transportation, safety always comes first for truck drivers! If the trailer is for peace of mind, then the trailer maintenance is for the continuation of life. Check that everything is okay before you go on the road.

半挂车最全保养手册,卡友们赶快收藏

According to the feedback of previous trailer drivers and the rich practical experience of market service professionals, we have summarized the knowledge strategy of semi-trailer use, semi-trailer maintenance and maintenance for you here, for the reference of the majority of cardholders:

▎First, the main assembly of the semi-trailer is introduced

半挂车最全保养手册,卡友们赶快收藏

● Suspension system (rigidity): transmit load and absorb vibration.
 

半挂车最全保养手册,卡友们赶快收藏

● Axle and hub system: The suspension system is equipped with single, two and three axle assemblies of the same structure. The tire and rim assembly are fastened to the wheel hub with tire bolts to support the weight of the whole vehicle.
 

半挂车最全保养手册,卡友们赶快收藏

● Outrigger lifting mechanism: In order to make the semi-trailer can be reliably parked after detaching from the tractor, two outriggers with linkage or single action are provided at the front end of the frame. It is composed of a screw transmission mechanism, a bevel gear transmission mechanism, a two-speed reducer, a transmission rod, an operating handle, etc.

When the handle is pushed in, the rotation can be lifted at high speed, and when the handle is pulled out, the rotation can be lifted at low speed. When the outriggers touch the ground, they can only be raised and lowered in low gear.
 

半挂车最全保养手册,卡友们赶快收藏

● Traction pin and guide plate/frame: The lower part of the front end of the frame has a towing pin and a towing pin connecting plate with the saddle of the tractor. The towing pin is mainly used to transmit the traction force of the tractor and the braking force when braking.
 

半挂车最全保养手册,卡友们赶快收藏

▎Second, semi-trailer circuit

The semi-trailer is connected by connecting the spiral cable plug of the tractor with the circuit socket at the front end of the trailer, which plays the role of transmitting the light signal of the main vehicle to the trailer.

Therefore, the vehicle is equipped with an international general electrical system that matches the tractor, and the electrical system is generally composed of seven-core sockets, multi-core cables, junction boxes, waterproof connectors, and various lamps and lanterns.

半挂车最全保养手册,卡友们赶快收藏

● Seven-core circuit connection diagram:

半挂车最全保养手册,卡友们赶快收藏

▎3. Semi-trailer gas circuit

Three major parts: emergency relay valve, ABS valve, brake air chamber, most of the faults come from these three parts.

半挂车最全保养手册,卡友们赶快收藏

半挂车最全保养手册,卡友们赶快收藏
 

● Emergency relay valve: The pneumatic components of the vehicle braking system realize emergency braking when the inflatable pipeline of the semi-trailer is damaged or the air intake is cut off, shorten the braking lag time and quickly release the brake, and replace the brake valve, distribution valve, acceleration valve and quick release valve in the original semi-trailer braking system.
 

半挂车最全保养手册,卡友们赶快收藏

● ABS (Anti-lock brake system): an electronic control system that monitors and controls the speed of the vehicle during braking, including ABS solenoid valve, ABS wiring harness, ABS probe, ring gear and other components. Cooperate with the relay valve to perform the service brake function; When the speed drops to 0, the signal is fed back to the solenoid valve, and the solenoid valve adjusts the air pressure of the air circuit, reduces the braking force, prevents the brake from locking, and increases the driving safety factor.
 

半挂车最全保养手册,卡友们赶快收藏

● Brake chamber
 

半挂车最全保养手册,卡友们赶快收藏

▎Fourth, semi-trailer braking system

It is composed of the trachea joint, inflation line, operation line, air reservoir, brake chamber, relay valve, ABS valve, ABS sensor and wheel brake of the tractor.

The inflatable pipeline is connected with the tractor air reservoir through a quick pipe joint; The control pipeline is connected with the brake valve of the tractor through the quick coupling, and when the semi-trailer is braking, each brake chamber acts at the same time.
 

半挂车最全保养手册,卡友们赶快收藏

● Service brake: In the process of driving, the service brake (foot brake) is generally used to facilitate deceleration and parking in the process of moving forward.

半挂车最全保养手册,卡友们赶快收藏

● Parking brake: The parking brake is the brake used when the car is stationary, which is called the parking brake, also known as the "handbrake", and its main function is to prevent the car from sliding forward and backward.
 

半挂车最全保养手册,卡友们赶快收藏

● Air brake (emergency braking): The emergency braking behavior automatically performed by the trailer braking system when the inflatable pipe is broken or seriously leaks, the control pipe will not be executed, but the "foot brake" will fail.

Importance: When the front air pump is damaged or the inflatable pipe is disconnected, and the air reservoir is seriously leaking, the "foot brake" of the vehicle fails or has a poor effect, and the air brake is an important guarantee for the safety of the vehicle or personnel!

▎Working braking state in normal braking:

半挂车最全保养手册,卡友们赶快收藏

When the brake pedal is pressed, the control pipeline (1) supplies air to the emergency relay valve (5), and the emergency relay valve (5) controls (6) the air storage cylinder to supply air to the (4) brake sub-cylinder to generate braking force; When the brake pedal is released, the emergency relay valve quickly releases the compressed air of each sub-cylinder and quickly releases the brake state.

▎Feedback braking status during inflation:

半挂车最全保养手册,卡友们赶快收藏

The trailer is parked for a long time, and when the braking system has no air pressure, this is when the parking brake system (shut-off brake) comes into play. When the tractor is inflated to the trailer (6) gas reservoir through the (2) gas supply pipeline, the emergency relay valve is in a safe braking state at this time.

Under the safe state, the (5) emergency relay valve first sends compressed air into each (4) brake cylinder, and when the air pressure of the trailer (6) gas reservoir rises to 4.5bar, the safe state is released. This function is referred to as the feedback braking function, and the brake cylinder generates braking force in the inflated state, which is a safety protection function.

▎Automatic braking status in case of emergency gas shutdown failure:

半挂车最全保养手册,卡友们赶快收藏

When (2) the air supply pipeline is accidentally damaged during driving, the compressed air in the air storage cylinder of the trailer (6) enters the (4) brake cylinder through the (5) emergency relay valve, and automatically executes braking measures to ensure the safety of the vehicle in an emergency, and can drive to the maintenance office for a short time, but it will not last too long. When the tractor is parked and the air supply pipeline of the trailer (2) needs to be disconnected, the trailer brake cylinder can also be seen to work, which is the same principle.

▎5. Semi-trailer inspection and maintenance

Vehicles need to do a good job of basic inspection and maintenance, inspection and maintenance work can avoid unnecessary safety hazards and can reduce the cost of use.
 

半挂车最全保养手册,卡友们赶快收藏
 

● Semi-trailer inspection

半挂车最全保养手册,卡友们赶快收藏

半挂车最全保养手册,卡友们赶快收藏

● Wheel maintenance
Job content: disassemble and inspect the wheel hub system, clean the shaft head and the internal and external bearing failure grease and replace the qualified new grease, check whether the bearing wear affects the use, check the working performance of brake pads, brake drums, brake pads and other components, and repair and replace them according to the inspection results.
 

半挂车最全保养手册,卡友们赶快收藏

Cycle:

(1) BPW shaft maintenance frequency: 12-150,000 kilometers.

(2) VALX shaft maintenance frequency: 2 years or 400,000 km (1 year or 200,000 km after maintenance-free).

(3) BPW 400K/600K: 2 years or 400,000 km/3 years or 600,000 km.

(4) Fuwa shaft maintenance frequency: 5-70,000 kilometers.

● Beat the butter

Contents: Butter injection or lubrication of semi-trailer legs, adjusting arms, camshafts, balance beam pins, leaf springs and other parts.
Cycle: Frequently used vehicles need to be buttered once every half to January or vehicles that have experienced heavy rainstorms also need to be lubricated with butter once, and vehicles that are not used frequently need to be buttered after being used again. Apply sufficient grease to ensure adequate lubrication and reduce component loss and damage caused by mechanical friction.

半挂车最全保养手册,卡友们赶快收藏

▎6. Container and tire maintenance

● Container maintenance
Introduction to the nouns of the envelope structure:
 

半挂车最全保养手册,卡友们赶快收藏

Container Repair Methods:

(1) Mesh repair: for holes, cracks, etc.

(2) Replacement maintenance: for large-scale damage and serious deformation.

(3) Scraping putty paint repair: for scratching with small deformation amplitude and no damage.

(4) Binder repair: for cracking, common composite plate box.

(5) Lining welding: cracking, open welding.

(6) Sheet metal correction: for deformation and bending, such as hinges, locks, etc.

(7) Glue sealing: rain leakage and water seepage of the top or side plate.

(8) Steel reinforcement: for the overall deformation of the composite plate, the expansion of the box, etc.
 

半挂车最全保养手册,卡友们赶快收藏

● Tire maintenance
 

半挂车最全保养手册,卡友们赶快收藏

Effect of tire pressure:
 

半挂车最全保养手册,卡友们赶快收藏