30

2025

-

05

How can you just drive? The most important thing is to be able to brake!


When it comes to big trucks, most people's impressions are linked to danger, indeed, there are many accidents caused by brake failure and brake failure, but truck drivers don't want to do this, not that they don't want to brake, but they can't brake at all. A truck alone weighs more than a dozen tons, plus a full load of goods, isn't it a behemoth. It's not easy to brake quickly and effectively.

光会开车怎么够?最关键还是得会刹车!

Here we might as well briefly understand the basic braking principle of trucks. Different from the oil brake of the car, most of the braking system of large trucks adopts air brake, which has a fast response speed and good braking effect. The air brake system consists of multiple parts, an air compressor, also known as an air pump, at least two air reservoirs, a brake master cylinder, a quick release brake on the front wheel of the truck, a relay brake on the rear wheel, four brake cylinders, four cams, eight brake shoes, and four wheel hubs that control the brake. Just looking at these components is very troublesome, and it also meets the braking needs of large trucks.

光会开车怎么够?最关键还是得会刹车!

The basic principle of air brake is to store the gas produced by the air compressor in two cylinders, one of which is connected to the master cylinder, when the driver steps on the brake pedal to make the brake master cylinder work, push the relay valve to work, and the other air reservoir pushes out the ejector rod of the brake cylinder, and rotates the cam through the adjustment arm, so that the irregular cam pushes the brake shoe to the top and the wheel hub to produce friction, so as to achieve the effect of braking.

光会开车怎么够?最关键还是得会刹车!

This braking is much better than a normal car, but once our big trucks are loaded with cargo, the effect is not so good. In order to control the speed, many drivers have been stepping on the brake pedal, and the brake hub has been in a state of friction for a long time, and the temperature continues to rise, and gradually loses the function of deceleration.

In order to cool down and improve the braking effect, drivers have also thought of a lot of methods, such as installing a water shower device, which is cooled down while stepping on the brake, so that the brake pads will not overheat. But there are also drawbacks, the water freezes in winter. Isn't there a safer way than the "dirt method" mentioned above? I believe that many old drivers will definitely blurt out: "Isn't there still an in-cylinder brake!" ”

光会开车怎么够?最关键还是得会刹车!

光会开车怎么够?最关键还是得会刹车!

Yes, the engine brake in the cylinder is known as the "downhill reducer artifact", but most drivers only know what it is, do not know why, do not understand the function of the cylinder brake, how can they better play their role?

To put it bluntly, the cylinder brake is only a kind of auxiliary brake, but compared with the exhaust brake that the driver is familiar with, the effect of the cylinder brake is not too good. It makes use of the principle of the engine's work, and discharges a part of the air pressure in advance during the work process, so that the power output of the engine is greatly reduced and the effect of deceleration is achieved.

光会开车怎么够?最关键还是得会刹车!

Many cardholders do not dare to boldly use the in-cylinder brake, for fear of damaging the engine, in fact, such worries are completely overwhelmed. When using the engine cylinder braking, the fuel injector will not inject fuel, and the explosion pressure in the cylinder will be much lower than that of normal combustion at the same time, so it will not affect the life of the engine at all.

Moreover, the cylinder braking technology is mature, the price is also relatively advantageous, and now most of the car companies are equipped with cylinder braking technology as standard, just like SAIC Hongyan's Coso engine has a standard in-cylinder braking system. At the same time, the FIAT patented high-efficiency engine braking system, through the ECU control braking system, the control is more accurate, the braking efficiency is up to 80%, effective braking while reducing brake pad wear and reducing fuel consumption.

光会开车怎么够?最关键还是得会刹车!

Cylinder braking is a good technology, I hope that cardholders not only understand its principle, but also commonly use. Like the Corso engine, its advanced in-cylinder braking system not only brings safety to the driver, but also extends the life of the brakes and tires, thereby saving the vehicle's operating costs.