24

2025

-

04

The brakes are not strong, and it's time to get a new brake cylinder


Medium and heavy trucks basically use compressed air as the braking medium, and the air compressor pump gas is stored in the air storage tank, and with each foot of the brake, the compressed air releases the force on the sub-cylinder and pushes the brake shoes for braking. In addition to tire friction and sufficiently large air pressure, whether the braking effect is good or not depends on how much output the brake cylinder is.

● Brake chamber, scientific name brake cylinder

刹车不给力 该换一个新的刹车分泵了

Small cars rely on a vacuum formed by the engine to push the master cylinder diaphragm (leather bowl) and then squeeze the hydraulic oil to push the caliper pistons, while trucks rely on the diaphragm inside the brake cylinder pushed by compressed air pressure to push the push rod.

The most common type of brake chamber on trucks is the dual-chamber brake chamber, the standard name of which is the energy storage spring brake chamber. This chamber combines the functions of the service brake and the parking brake and is widely used on drive and trailer axles.

Although the braking medium of the two is different, from the perspective of structural form, the two have similarities. The structure of the brake cylinder of a truck is similar to that of a small car's brake master cylinder – it relies on air pressure (vacuum) to push the diaphragm inside the pump to generate thrust.

刹车不给力 该换一个新的刹车分泵了

As you can see from the planing diagram of the dual-chamber brake chamber above, the dual-chamber brake chamber has two air interfaces, which are connected to the driving chamber and the parking chamber respectively.

Here, you only need to remember that the service brake is a "ventilation brake", and the parking brake is a "shut-off brake". Matched with this is the spring inside the driving and parking cavities.

刹车不给力 该换一个新的刹车分泵了
行车制动

For example, during service braking, air enters the service brake cavity from port 11, pushes the diaphragm, and squeezes the spring, so that the vehicle brakes.

刹车不给力 该换一个新的刹车分泵了
驻车制动

When the parking brake is used, the air in the parking cavity is discharged and the push rod is pushed by the internal spring, so as to achieve the parking brake.

刹车不给力 该换一个新的刹车分泵了
解除驻车制动

On the contrary, the release of the parking brake is the opposite, the air enters the parking brake cavity from port 12, and the air pushes the diaphragm to squeeze the spring, so that the parking brake is released.

The key point is that since the diaphragm is moved by air, the quality of the diaphragm must be particularly reliable.

Once the diaphragm leaks and is damaged, the consequence is that the output of the sub-pump is insufficient, and the driving brake is not strong or even malfunctioning.

The parking brake, on the other hand, will work all the time, resulting in dragging.

If the quality of the spring in the driving cavity is not good, the return ability is weak, resulting in the vehicle dragging and braking, and the spring quality in the parking cavity is too poor, it leads to the decline of the vehicle's parking braking ability, resulting in serious accidents such as rolling.

刹车不给力 该换一个新的刹车分泵了

All in all, this thing can't be broken anywhere, and if it breaks one place, it will move the whole body - either it can't stop, or it can't run. Therefore, you need a reliable spring-loaded brake chamber.

● WABCO's quality, domestic price - Puvia spring brake chamber

刹车不给力 该换一个新的刹车分泵了

Needless to say, the famous WABCO has a history of more than 150 years, and the air valve products have been started to make air brake products to the point of perfection.
 

 

刹车不给力 该换一个新的刹车分泵了

In terms of product quality, Puwei strictly follows WABCO's quality specifications and provides cost-effective products through more optimized cost control.

刹车不给力 该换一个新的刹车分泵了

The spring brake chamber produced by Puvia uses high-quality parking brake springs to ensure stable and reliable parking braking force, and the service life can reach 150,000 times. To put it mildly, if you use the parking brake 100 times a day, the life of this parking brake can still reach 4 years.

In the key diaphragm, Puvia's cab diaphragm has passed 1.2 million lifetime tests and can withstand temperatures as high as 70 degrees Celsius and temperatures as low as minus 40 degrees Celsius, so that braking performance is not affected at any temperature.

刹车不给力 该换一个新的刹车分泵了

All steel plate raw materials are treated with Baosteel electrophoresis, which has excellent anti-corrosion performance. In addition, the Puvia spring brake chamber adopts 8.8 grade high-strength bolts to ensure sufficient tightening torque and avoid premature bolt failure and air leakage caused by bolt failure.

It is worth mentioning that in order to ensure the safety of personnel, the parking cavity of the Puvia spring brake chamber adopts an anti-disassembly design, which can prevent accidental disassembly and avoid personal injury.