23

2025

-

04

Four-circuit valve: the evolutionary history of the "central nervous system" of pneumatic brakes


The four-circuit valve on the truck acts as the central nerve in the braking system, and by precisely distributing the compressed air into four independent circuits, it builds the most important safety system of the truck. How does this seemingly simple valve body ensure the safety of the truck?

In the 50s of the 20th century, with the emergency recovery of Europe after the war, the carrying capacity of trucks climbed rapidly from 10 tons to more than 20 tons. The fragility of the traditional single-circuit air brake system has been exposed in major accidents - the investigation of a trailer out of control accident in Munich, Germany in 1958 showed that the main cause of the accident was the failure of the whole vehicle brake caused by the rupture of a single trachea. There is an urgent need for more reliable brake redundancy solutions.

四回路阀:气压制动的'中枢神经'进化史

Although the dual-circuit protection valve introduced by WABCO in 1952 improved the basic safety, it still had limitations in the scenario of multi-axle tractor combination. When the driver brakes frequently on long downhill sections, a sudden drop in reservoir pressure can cause the secondary braking system to fail. In 1963, the SAE J1505 standard was promulgated, which clearly required that heavy-duty vehicles must be equipped with multiple independent braking circuits.
 

四回路阀:气压制动的'中枢神经'进化史

The rise of new logistics forms such as cold chain transportation and dangerous goods transportation has put forward higher requirements for the reliability of continuous braking of vehicles. Mercedes-Benz was the first full-time braking system based on a four-circuit valve on the LP series trucks released in 1967, marking the formation of a modern heavy-duty truck braking architecture.

Reason for the invention: Driven by the need for safety

The invention of the four-circuit valve originated from the unremitting pursuit of safety in truck braking systems. In early truck braking systems, a single-circuit or dual-circuit design was common. However, there are obvious safety hazards associated with this design: if a circuit fails, such as a ruptured or leaking pipeline, the entire braking system can fail, causing the vehicle to brake effectively and causing a serious traffic accident.

四回路阀:气压制动的'中枢神经'进化史

In order to improve the reliability and safety of the braking system, engineers began to explore the possibility of a multi-circuit braking system. In this context, the four-circuit valve came into being. It divides the truck's braking system into four interconnected and independent circuits, ensuring that if any one circuit fails, the other circuits can still work properly, thus greatly improving the redundancy and safety of the braking system.

The role played: multiple guarantees, safe braking

卡车四回路阀每个回路作用
回路1前桥行车制动
回路2后桥行车制动
回路3驻车制动与辅助制动
回路4离合器、悬挂调整等辅助设备
 

Four-circuit valves play a vital role in truck braking systems. Its main role is reflected in the following aspects:

Improved braking reliability: By dividing the braking system into four independent circuits, the four-circuit valve ensures that if one circuit fails, the other circuits can continue to work, providing sufficient braking power to bring the vehicle to a safe stop.

 

四回路阀:气压制动的'中枢神经'进化史

Enhanced System Flexibility: The design of the four-circuit valve allows the individual circuits to be adjusted independently to meet actual needs, increasing the flexibility and adaptability of the braking system.

Protect system components: In the event of a failure, a four-circuit valve automatically closes the fault circuit to prevent further air pressure leakage, thus protecting other circuits and system components from damage.

Improved driving safety: The application of the four-circuit valve significantly improves the braking performance and driving safety of the truck, providing a more reliable guarantee for the driver and passengers.

Technology iteration: from basic to intelligent

Since the advent of the four-circuit valve, its technology has undergone continuous iteration and upgrading. Here are a few key stages of technology development:

Basic design stage: The early four-circuit valve design was relatively simple, and the main function was to achieve air pressure distribution and protection. While these foundational designs meet basic security requirements, there is still room for improvement in performance and reliability.

 

四回路阀:气压制动的'中枢神经'进化史

Material & Technology Innovation: With advances in materials science and manufacturing technology, the material selection, manufacturing process, and sealing performance of the four-circuit valve have been significantly improved. This makes the four-circuit valve more durable, reliable, and able to maintain consistent performance in harsher operating environments.

Intelligence and integration: In recent years, with the accelerated development of the trend of automotive electronics and intelligence, the four-circuit valve has also begun to move towards intelligence and integration. Modern four-circuit valves not only provide basic air pressure distribution and protection, but also communicate with the vehicle's electronic control system for more precise braking control and fault diagnosis.
 

 

四回路阀:气压制动的'中枢神经'进化史

Environmental protection and energy saving: With the increasing global concern for environmental protection and energy saving, the design of four-circuit valves has also begun to focus on reducing energy consumption and emissions. For example, by optimizing the air pressure distribution and control system design, energy consumption and emission levels during braking can be reduced.

Future Trend: Continuous Innovation and Security Upgrades

Looking to the future, the technological development of four-circuit valves will show the following trends:

 

四回路阀:气压制动的'中枢神经'进化史

More intelligent: With the continuous development of automotive electronics and intelligent technology, the four-circuit valve will be more intelligent. Through deep integration with the vehicle's electronic control system, more accurate braking control and fault diagnosis can be realized, and driving safety and comfort can be improved.

Higher reliability: In order to meet increasingly stringent regulations and market demands, the reliability of four-circuit valves will be further enhanced. By adopting more advanced materials and manufacturing processes, optimizing structural design, etc., the durability and stability of the four-circuit valve are improved.

四回路阀:气压制动的'中枢神经'进化史

More environmentally friendly and energy-saving: In the context of environmental protection and energy conservation becoming a global consensus, the design of four-circuit valves will pay more attention to reducing energy consumption and emissions. For example, energy consumption and emissions levels during braking can be reduced through the use of more efficient air pressure distribution and control system design, and the development of new energy-saving materials.

Versatile integration: Future four-circuit valves may integrate more functions such as barometric pressure monitoring, fault diagnosis,

四回路阀:气压制动的'中枢神经'进化史

Emergency braking assist, etc. This will enable the four-circuit valve to provide more comprehensive vehicle condition monitoring and fault diagnosis services while ensuring driving safety.

epilogue

As a key component in the braking system, the invention and development of the four-circuit valve of trucks has witnessed the unremitting pursuit of safe driving and the power of technological innovation. From the basic design to the development of intelligence and integration, the four-circuit valve has been continuously iteratively upgraded, providing a strong guarantee for the braking performance and driving safety of the truck.

Looking forward to the future, with the continuous development of automotive electronics and intelligent technology and the increasingly urgent demand for environmental protection and energy saving, the four-circuit valve will continue to develop in the direction of more intelligent, high reliability, environmental protection and energy saving and multi-functional integration, providing a more solid guarantee for safe driving in the field of heavy transportation.