07

2021

-

10

Introduction to the Knowledge of Differential Relay Valve in Automotive Brake Air Circuit


The differential relay valve is used to shorten the charging and discharging time of the large volume spring brake chamber located at the end of a long pipeline, playing a role in accelerating inflation and rapid deflation. It can prevent the simultaneous operation of the driving and parking brake systems and the overlap of forces in the spring brake chamber, avoiding overload operation of mechanical transmission components.

1. Applications:

The differential relay valve is used to shorten the charging and discharging time of the large volume spring brake chamber located at the end of a long pipeline, playing a role in accelerating inflation and rapid deflation. It can prevent the simultaneous operation of the driving and parking brake systems and the overlap of forces in the spring brake chamber, avoiding overload operation of mechanical transmission components.

2. Working Principle:  

When the brake pedal is pressed, the output air pressure of the relay valve serves as the control pressure input for the relay valve. Under the action of the control pressure, the intake valve is pushed open, allowing compressed air to enter the brake air chamber directly from the air reservoir through the intake port, without passing through the relay valve. This greatly shortens the charging pipeline of the brake air chamber and accelerates the inflation process of the air chamber.

3. Technical Parameters:

• Medium: Air

• Working Air Pressure: 800Kpa

• Operating Temperature Range: -40° to +80°

4. Interfaces:

•  Port 41: Control Port (connects to foot brake valve)

•  Port 42: Control Port (connects to hand brake valve)

•  Port 1: Intake Port (connects to air reservoir)

•  Port 2: Output Port (connects to brake chamber)

•  Port 3: Exhaust Port

5. Key Points for Testing the Differential Relay Valve

• Sealing Performance

1. Non-working State: Air enters through Port 1, check the valve body, all connection points, and the exhaust port, while observing the pressure drop on the gauge;

2. Working State: Air enters through Port 1, open Ports 41 and 42 separately and simultaneously. When the output ports reach the rated working air pressure, close Port 1, check the valve body, all connection points, and the exhaust port, while observing the pressure drop on the gauge.

• Static Characteristics

1. Follow-up Balance: When the control air pressure at Port 4 is at any value, the output air pressure can also remain synchronized and stable at the corresponding pressure value.

2. After opening Port 42 until the output air pressure reaches the rated value, then open Port 41, observe whether the output port pressure value remains stable;

3. After simultaneously opening Ports 41 and 42 to reach the rated value, then release the air pressure at Port 42, observe whether the output port pressure value remains stable.

• Dynamic Characteristics

1. Alternately input air into Ports 41 and 42 repeatedly, ensuring that the piston and other moving parts move sensitively without any obstruction or jamming;

2. Exhaust from the exhaust port is smooth.

     

Zhuji City Dongsan Vehicle Parts Factory is a production enterprise integrating R&D, production, and sales. The factory's "Yuecheng" Brand mainly includes: air dryer assembly, brake master valve, front and rear brake sub-pumps, four-circuit valve, relay valve, clutch master pump, sub-pump, exhaust brake valve, and other brake and clutch system pump and valve products for commercial vehicle auto parts.

     The factory was established in 1996, has independent R&D experience, and its products are sold to countries and regions such as Africa, Russia, Belarus, South America, Southeast Asia, and the Middle East.

     Sales Tel: 86-575-87438928